In my experience, the quality of wine corks varies greatly. Many are too crumbly to be decent fly material, or have inconvenient voids. So cork selection is the most important step.
After that, you need the tools to shape the cork. I have seen folks improvise a lathe from a power drill or rotary tool to get a round shape. If you're headed to District Angling, you can stop by Cherrydale Hardware to see if they have Dragon Skin or something similar for rough shaping.
Another way to do it with slices of cork, a la the Gerbubble Bug (google 'cork Gerbubble Bug').
Have fun!
Miles
On Thursday, December 10, 2020 at 9:05:43 PM UTC-5 adaml...@gmail.com wrote:
I would add, I'd like to get my materials from District Angling mostly.On Thursday, December 10, 2020 at 9:04:14 PM UTC-5 Adam Harris wrote:I'm looking at trying my hand at tying some of these. Looking for hints and links to helpful YouTube videos. I've got plenty of corks (for now), but wanted to reach out to y'all before i started tying.
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/49d44926-b4a6-4067-806e-49d0ef78dea8n%40googlegroups.com.
No comments:
Post a Comment