Re: {Tidal Potomac Fly Rodders} Damaged Fly Line

Paul,

You have several options.  First cut the line clean with a nipper at the break.  Then do one of the following:

1. Fold the line over onto itself and make a small loop.  Put 2 or 3 6-turn nail knots with 12lb mono.  You can coat the knots with a flexible glue or Loon's UV Knot Sense
2. Tie stiff section of 40lb. mono to the end using either a nail knot or an albright.  If the core of the flyline is mono, use an albright.  If it's a braided core, you can use a nail knot (I use an albright on all my lines but if you don't tie it correctly, it slips).  Make your butt section about a foot, and put a perfection loop in the end.
3. Use (or make) a braided loop with 30-50lb braided core and slip the end of the line up into the braid and finish properly.
4. Come into a local shop and we'll do it for you.

R

Richard Farino

Urban Angler VA | 108 N. Washington Street  2nd Floor | Alexandria, VA 22314 

(703) 527-2524 | fax: (703) 527-3313 | richard@urbanangler.com    

From: Paul Kalajainen <paulkalajainen@gmail.com>
Reply-To: <tidal-potomac-fly-rodders@googlegroups.com>
Date: Friday, November 8, 2013 9:28 AM
To: <tidal-potomac-fly-rodders@googlegroups.com>
Subject: {Tidal Potomac Fly Rodders} Damaged Fly Line

I got snagged on a rock at Gravelly Point last night and in the process of freeing (breaking off) my line the end of my fly line was damaged (see photo).  Question: what can/should I do about this?  Does this compromise the strength of the line?  Is there some kind of glue/sealant I could use to coat this area?  Should I just cut it off and tie the leader to the fly line?  Thanks in advance for the advice.

Paul

--
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/c24caed6-26d5-43ae-ba28-4733dd5c86e1%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.