Saturday, January 25, 2014

{Tidal Potomac Fly Rodders} Re: DIY Wading Boots

Last year, I took my wife steelheading a number of times on Lake Erie tribs and hacked together some wading boots for her based on old hiking boots. Being oversized they fit the wader booties and a number of pairs of socks well. The height was also good as it is easy to roll your ankle wading. For studs, necessary for the shale on those rivers, I used carbide ice-screws, which are pretty cheap (http://www.koldkutter.com/catalog/index.php). The other key was to drill holes in the boots so that they could drain for this I matched the pattern on my wading boots. If you're interested I went a little nuts (no pun intended) and bought a 250 pack of the ice screws -- I'd be happy to share if you need some.  
Good luck,
Andrew

On Saturday, January 25, 2014 10:45:07 AM UTC-5, MattT wrote:
Hey Everyone. 

Looking at wading boots, and also my wallet... and the two aren't friends. Thought about getting a cheap pair of hiking boots and having at it. I talked with a few people who mentioned slipping being a problem... and came up with the idea to throw these on the bottom.  Has anyone tried this? Success stories/ warnings?


--
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/f8b85de9-0e3f-4822-ab43-0c934e189c34%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

No comments:

Post a Comment