Re: {Tidal Potomac Fly Rodders} Reel foot repair question

Well, I took care of it in a manner of speaking. I ended up drilling the old screws out. I had Dan at the Orvis shop look at this reel about a year ago and neither one of us recognized the screw head (looked like a phillips but didnt fit any phillips that he or I had available). Also, years of saltwater use probably allowed some corrosion to set in locking them up. Anyway, supposedly I have a new part on its way from SA. The old foot is just warped badly lengthwise. I wish I had a decent camera. I know from another thread I googled up that others have had the same problem. For the price point these reels have a good drag system so I didnt want it to just keep gathering dust. Thanks for the followup advice.

On Friday, December 13, 2013 8:12:37 PM UTC-5, Carl wrote:

Did you get this taken care of?

A picture would help.   If you are going to have to replace the reel seat anyway, grinding it down a bit with a dremel tool might get it to fit well in the meantime.

I have a few older system 2's and they have normal phillips screws.

Carl

On Sat, Dec 7, 2013 at 8:01 AM, John Smith <nati...@gmail.com> wrote:

Any of you guys replaced a reel foot on a scientific angler or Orvis reel? My SA 1011 was made in England and has some weird screws securing the reel foot. Same type as on my Battenkill 8/9 reel. I cant figure out what to use to remove them. I have a new one  on the way. The old foot no longer sits properly on my reel seat. I emailed SA too, but thought i would check here as well. Thanks.

--
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potoma...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/df674ba6-acc1-4846-9b7e-83dd9badd8cc%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/4c95eab6-ebc1-415e-a131-4477133535c8%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.