I agree with shortening that leader and there is no reason to go down below 8lb mono for this type of fly.
Tyler, you were right on with:
I altered my cast to a more "rolling" motion as opposed to just keeping my rod straight, but it didn't really help me.
It sounds like you were getting toward the Belgian cast. That works well.
So does opening your loops up (none of those tight loops for these things)
I have cast lead head jigs on a 4 wt, but you get the bouncy problem you are talking about. This is where a 7 or 8wt comes in really handy.
I also like a slower rod for these heavy flys. You can get by with a relatively inexpensive rod for this because it doesn't need to (and shouldn't) be extra fast. Another thing is that if you hit your rod with the clouser, you can damage the rod itself.
Good luck.
Carl
On Thu, Dec 12, 2013 at 4:50 PM, TurbineBlade <doublebclan@gmail.com> wrote:
A #2 leaded clouser is tough on a 5/6 weight fly line, in areas very near the big river (with wind being common) no matter what you do. I'd chop down to a 5-6' leader of heavy mono like the ^^ guy said. Try a belgian cast and/or lobbing to avoid overhead casting altogether.I find that I don't catch fewer fish on smaller streamer patterns, so I mostly toss #6-12s. If you like the bigger stuff, you might consider a 7-8 weight fly line to carry those suckers a bit better.
Gene
On Thursday, December 12, 2013 4:44:51 PM UTC-5, Scott S wrote:You'll definitely be better off with a shorter and thicker leader for flies like Clousers. I suggest just using a section of straight (2-3 feet) 18-20 lb mono to something smaller like 10-12 lb (also like 2-3 feet). Overall, my leader is usually 6-9 feet when fishing Clousers around here. I just use a 20-lb "butt" section tied directly a 12-lb "tippet" section, though I think it's recommended to use something in between (like a short section of 16-lb) as knots work best with materials that are of similar diameter. Perhaps someone more knowledgeable on that subject could weigh in?What size rod are you using? The above is my setup for an 8-weight. It would probably be the same for a 6- or 7-weight, but I don't think it would work so well for anything lighter than that.Not that it will impact your casting, but one thing that is highly recommended when fishing minnow-like patterns such as the Clouser is to use a loop knot to attach your fly to the tippet. Something like a Non-slip Mono loop works well. This gives the fly a little more movement when it's in the water.--ScottOn Thu, Dec 12, 2013 at 4:22 PM, Tyler Lucas <tylerl...@gmail.com> wrote:
Hello all,
What is the preferred leader for a #2 clouser minnow? The reason I am asking is because I used a heavy fly for the first time today ( I am a beginner ) and I encounterd a "dog hitting the end of a leash" effect, and it was giving me alot of trouble with my casts. I was wondering if you are supposed to use a shorter, or heavier leader in order to prevent that from happening. I altered my cast to a more "rolling" motion as opposed to just keeping my rod straight, but it didn't really help me.
I apologize if I sound like I have no idea what I am talking about, honestly I really don't.
Any way, any advice would be greatly appreciated.
Tyler Lucas
--To post to this group, send email to tidal-potoma...@googlegroups.com.
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/5dafe574-60ef-44a9-8b4a-e17120ecbb7b%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
================================================
"There are 10 types of people in this world, those who know binary, and those who don't"--To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/0a8a66c7-6cad-4fc5-abf2-d377ae175a99%40googlegroups.com.
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/CAK8gq%2BHetppgqaoOx5LLc1QRf2ybc-m7EhEigDuLQV5y-qsEFw%40mail.gmail.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment