I used to build my own rods. I eventually stopped, since it seemed the only rods I ever broke were the ones I'd built myself, and obviously they didn't have warranties. As Steve mentioned, you can use a shoebox as a wrapping jig, which is how I did my first couple rods before buying a lower-end wrapper. But honestly, unless you're looking to make a hobby out of it, I'd have somebody else rewrap a new guide. It's not rocket science, but it takes a little time to learn how to wrap and finish a guide cleanly (the first rod I built, a little 3 weight I still use for brookies, is strong evidence of that). And I don't think you'd save much money doing it on your own. In fact, if that guy will do it for $10, you won't save any money at all, between the thread and epoxy.
On Thursday, June 19, 2014 3:59:07 PM UTC-4, Eric Y. wrote:
-- On Thursday, June 19, 2014 3:59:07 PM UTC-4, Eric Y. wrote:
I live one block from Phil's shop. Doesn't keep a lot of stuff in the shop, but he's a super nice guy and did nice work on my surf casting rod. I think I paid $8/guide. He also spools braid for a reasonable price. The hours seem to be "whenever I feel like being there," but other than that, no complaints here.The only thing I'd be aware of is that you might void your warranty by having him wrap on new guides. not a bit deal, perhaps, but it could be if the rod were to break within the warranty period.
On Thursday, June 19, 2014 3:33:50 PM UTC-4, Jeff wrote:I broke a guide on my 5 wt. took it to this old guy in Arlington, $10 and he had it done in two days. http://www.yelp.com/biz/rod-and-reel-repair-arlington . No one can tell which guide was replaced. I had thought about doing it myself but Im glad I didn't. Plus the old guy was really nice and I was happy to give him business. He's a real pro more like an artist, can't recomend him enough.On Thu, Jun 19, 2014 at 3:04 PM, Steve Christopherson <stephen.chr...@gmail.com> wrote:
Clarence,--It is not difficult to do, especially if the thread is a standard color, but can be pain. Even if it's $25, it's still reasonable to have a pro with the equipment and materials fix it; you will spend that much in materials and shipping easily. You can learn to do it yourself though. Determine which guide it is (counting from the tip down). Most manufacturers will use two #1, two #2, two #3, two #4 (progressively larger towards the butt). If it's a 8.5' or 9' there are probably 9 snake guides and 1 stripping, 8' is probably 9 snake guides. You DON'T need any special equipment to wrap the guide, just nylon rod wrapping thread and PacBay (I think) makes little packages of rod finishing epoxy (to apply to the thread), and youtube. You can use a cardboard box as a wrapping jig, throw the thread spool into a coffee cup and run the thread through a book (stacking weight on the book) to adjust the tension. I built my first two rods with this set up before going with a professional set up. - Steve
On Thursday, June 19, 2014 10:31:52 AM UTC-4, Clarence Fullard wrote:I broke a snake guide on my 5wt Greys rod. It has a warranty, but between the hassle of actually getting a hold of the customer service department, paying the shipping, and forking over a warranty fee, I could purchase a new rod with less hassle, the same cost, and faster shipping.......so:
Can anyone give me advice on how to replace a snake guide? I can't imagine it is that difficult, though getting the wraps back on neatly could be challenging without some sort of tool to spin the rod rather than spinning the thread. I searched online and found the new guides to be inexpensive, but I have no idea what size to get.
Thanks!
Clarence
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com .
To post to this group, send email to tidal-potoma...@googlegroups.com .
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly- .rodders/0d156f77-c1b4-4bf6- 84bf-27b9c3cca51e% 40googlegroups.com
For more options, visit https://groups.google.com/d/optout .
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/8ac8b1fb-457a-4dfe-9f8c-e3b5c73ef387%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment